940002904 Cooling Fan Control Relay Module Fits Ford Crown Victoria 4.6L 2006-11 High quality

Description

940002904 Cooling Fan Control Relay Module is a critical component for 2006-2011 Ford Crown Victoria models equipped with the 4.6L V8 engine. Here’s everything you need to know:

🔧 Core Specifications

✔ OEM Numbers: 940002904

• Ford: 9L8Z-8C609-AA / 9L8Z-8C609-BA

• Motorcraft: YH-1715
  ✔ Electrical Ratings:

• 12V DC operation

• 70A max current capacity

• Controls both low and high fan speeds

🚗 Precise Vehicle Fitment

• Ford Crown Victoria (2006-2011)

• Only for 4.6L 2V V8 (Windsor) engines

• Includes Police Interceptor models
  • Also fits:

• 2006-2008 Mercury Grand Marquis

• 2006-2011 Lincoln Town Car (verify connector type)

⚠ Failure Symptoms

▸ Most Common Signs:

• Engine overheating in traffic

• Cooling fans not activating

• Fans stuck on high speed

• Intermittent fan operation

• Check Engine Light with codes:

  • P0480 (Fan Control Circuit 1)

  • P0481 (Fan Control Circuit 2)

🔌 Installation Guide

1. Location:

   • Mounted on radiator support (driver side)

   • Behind headlight assembly

2. Replacement Steps:

   • Disconnect battery negative terminal

   • Remove 10mm mounting bolt

   • Unplug electrical connector

   • Transfer fuse from old module (if applicable)

3. Testing:

   • KOEO test: Fan should run briefly at startup

   • With A/C on: Both fans should activate

📜 Technical Notes

• Police models may have upgraded cooling fan wiring
• Early 2006 models might need connector adapter
• Aftermarket versions may require fuse transfer

⚠ Critical Warnings

✖ Not Compatible With:

• 2005 and earlier Crown Vics (different PWM control)

• 4.6L 3V engines (Mustang, F-150)

• Vehicles with dual electric fan setups

For proper diagnosis:

1. Check fuse #37 (50A) in engine compartment

2. Verify coolant temp sensor operation

3. Test fan motor direct power supply
   https://senlunautopart.com/product/